@B P Category Lighting - AS/NZS 1158.3.1:2005 @B ****************************************** @B ELC - Essential Lighting Consultancy Ltd @B ---------------------------------------- I-table Filename: C:\Users\Steve Muir\Documents\Lighting Design\Long ford Bridge GDC\Solar info\SBL2-200AWW.cie Job Name: Longford Bridge PP5 Solar option shared Pathway Luminaire Description: LL22564 66 lms Lamp Wattage & Type: 120W Warm white Initial Lamp Flux: 39.6 lms Maintenance Factor: 0.7 Stores Code: Upcast Angle: 0 degrees Arrangement: Single Side Offset Distance: -.3 m [ ie. away from Path edge ] Upward Waste Light Ratio: 6.1 % Light Source: LED - Light Emitting Diode Luminaire Classification: Not specified @B Lighting Category: User Defined Illuminance Criteria: Average Illuminance (Eav) >= 0.85 lx (Maintained values) Minimum Illuminance (Eph) >= 0.14 lx Illuminance Uniformity (Up) <= 5 Calculation Grid: Dependant on Path width (refer Figure 3.8 of AS/NZS 1158.2) @B Mounting Maximum Spacing for different @B Height Path Widths @B -------- ----------------------------- 2.2 3.0 +-------------+ 0.5 | 4.0 - | 0.6 | 4.8 2.1 | 0.7 | 5.9 2.7 | 0.8 | 6.1 3.1 | 0.9 | 6.4 4.4 | 1.0 | 6.6 4.8 | 1.1 | 6.8 5.1 | 1.2 | 6.9 5.2 | 1.3 | 7.1 5.2 | 1.4 | 7.0 5.3 | 1.5 | 6.9 5.4 | +-------------+ Value/s in above table are all in metres. The table contains maximum spacings which, for the specified luminaire and lamp combination, provide compliance with the User Defined light technical parameters (LTPs) nominated above. --------------------------------------------------------------------------- @IPlePcat - Vers 3.10 (Built: 10/ 4/13) Run: 22/10/2020 at 18:03:58